If your LG NanoCell NANO90 HDMI no signal problem is preventing you from enjoying your gaming console, Blu-ray player, or streaming device, you're not alone. This frustrating issue can stem from loose connections, incorrect input settings, or compatibility problems with HDMI cables. The good news is that most LG NanoCell NANO90 HDMI no signal errors can be resolved with systematic troubleshooting—no technician visit required. Follow the steps below to diagnose and fix the problem quickly.
Quick Fixes for HDMI Connection Problems
1
Check Physical HDMI Connections: Power off both your LG NanoCell NANO90 and the connected device. Firmly unplug the HDMI cable from both ends, inspect for bent pins or debris, then reconnect securely. Try a different HDMI port on the TV—ports can wear out or develop faults over time.
2
Verify Correct Input Source: Press the Input button on your LG Magic Remote. Ensure you've selected the exact HDMI port where your device is connected (HDMI 1, HDMI 2, etc.). The NANO90's on-screen display shows active ports in white and inactive ones in gray—select only the white-highlighted input matching your cable.
3
Test with a High-Speed HDMI Cable: Standard HDMI cables often fail with 4K/HDR content. Replace your cable with a Premium High Speed or Ultra High Speed HDMI certified cable. For the NANO90's 4K 120Hz capabilities, HDMI 2.1 compatibility is essential—look for cables explicitly rated 48Gbps.
4
Power Cycle Your Devices: Unplug your LG NanoCell NANO90 from the wall outlet for 60 seconds. While waiting, also disconnect your external device's power cable. This clears temporary memory glitches that can cause handshake failures between HDMI-CEC devices.
Advanced Troubleshooting Settings
5
Disable HDMI-CEC (Simplink): Navigate to Settings > General > Simplink (HDMI-CEC) and toggle it Off. CEC conflicts between multiple connected devices frequently trigger the LG NanoCell NANO90 HDMI no signal error. After testing, you can re-enable Simplink and reconfigure device priority if needed.
6
Update Firmware and Reset Picture Settings: Go to Settings > Support > Software Update > Check for Updates. Install any available updates, as LG regularly patches HDMI compatibility issues. If problems persist, reset picture settings: Settings > Picture > Additional Settings > Reset to Initial Settings.
Warning: Avoid forcing HDMI cables into ports at awkward angles—this can permanently damage the NANO90's main board. If you must route cables through tight spaces, use 90-degree adapter connectors rather than bending cables sharply.
Still Need Help With Your LG Device?
If these steps didn't resolve the HDMI no signal issue, our certified technicians can help.
Why does my LG NanoCell NANO90 say "No Signal" only with my PS5 or Xbox?
Gaming consoles output at variable refresh rates that can confuse HDMI handshakes. On your NANO90, enable HDMI Deep Color for the specific port: Settings > Picture > Additional Settings > HDMI Deep Color > Select your port > Choose 4K. For PS5 specifically, boot into Safe Mode and lower the output resolution to 1080p, then gradually increase after establishing a stable connection.
Can a firmware update fix persistent HDMI no signal problems?
Yes—LG has released multiple firmware patches addressing HDMI 2.1 compatibility, particularly for early production NANO90 models manufactured in 2020-2021. Check your current firmware version under Settings > Support > TV Information. If you're running version lower than 03.21.35, updating is strongly recommended for stability improvements.
Should I use the HDMI ARC port for regular devices?
HDMI 2 (ARC/eARC) on the NANO90 is optimized for soundbars and audio receivers, not general video devices. Connect gaming consoles, streaming sticks, and Blu-ray players to HDMI 1, 3, or 4 instead. Using ARC for non-audio equipment can trigger detection errors and limit available bandwidth for 4K HDR content.