Why is my LG OLED G2 turns on then off?

Common causes include software issues, connectivity problems, and settings misconfigurations. Follow our guide to fix your LG OLED G2.

How do I fix LG OLED G2 turns on then off?

Start by restarting your device, checking connections, and updating firmware. Our step-by-step guide provides detailed instructions.

When should I call support for my LG OLED G2?

If troubleshooting doesn't resolve the issue, or you encounter persistent errors, contact a certified LG technician.

LG OLED G2 Turns On Then Off

If your LG OLED G2 turns on then off unexpectedly, you're dealing with one of the more frustrating TV problems. This issue—where the screen briefly lights up, displays the LG logo or home screen, then shuts down within seconds—can stem from power problems, firmware glitches, or internal hardware faults. The good news is that many causes are fixable at home without professional service. This guide walks you through proven troubleshooting steps to get your LG OLED G2 running reliably again.

Quick Power and Connection Fixes

Start with the basics. Power-related issues are the most common reason an LG OLED G2 turns on then off repeatedly. These steps address loose connections, faulty outlets, and energy-saving settings that may trigger premature shutdown.

Check the Power Cord and Outlet: Firmly push the power cord into both the TV's power port and the wall outlet. Try a different outlet to rule out a faulty circuit. Avoid power strips or surge protectors temporarily, as these can sometimes fail or provide inconsistent voltage.

Perform a Hard Reset: Unplug the TV from the wall, then press and hold the physical power button on the TV itself (not the remote) for 30 seconds. This drains residual power from capacitors. Wait a full 60 seconds, then plug back in and power on. This simple reset resolves many boot-loop situations.

Inspect the Power Board Indicator: With the TV plugged in, look for a small standby LED on the front or bottom edge. If it blinks in a specific pattern when the TV shuts off, count the blinks—this is an error code. Two blinks typically indicate a power supply issue; five blinks often point to a main board problem.

Disable HDMI-CEC (Simplink): Connected devices can accidentally trigger shutdown commands. Press the Settings button on your remote, go to All Settings > General > Devices > HDMI Settings > Simplink (HDMI-CEC), and turn it off. Disconnect all HDMI cables, then test if the TV stays on.

Software and Settings Troubleshooting

When your LG OLED G2 turns on then off after the logo appears, firmware corruption or incorrect settings may be interrupting the boot process. These steps focus on resolving software-level causes.

Update Firmware via USB: If the TV shuts down before completing a network update, use a manual USB update instead. Download the latest firmware for OLEDG2 from LG's support site to a FAT32-formatted USB drive. Insert it into the TV's USB port, then hold the TV's physical power button while plugging the TV back in to initiate emergency mode recovery.

Reset to Factory Defaults: If you can access settings before shutdown, navigate to All Settings > General > System > Reset to Initial Settings. Choose the option to retain network settings first—if that fails, perform a full factory reset. This clears corrupted configurations that may cause the boot loop.

Warning: A factory reset will erase all personalized settings, installed apps, and login credentials. Do not interrupt the reset process once started—unplugging during this operation can brick the TV's software permanently.

Frequently Asked Questions

Why does my LG OLED G2 keep turning off by itself?

The most common causes are a faulty power supply board, overheating protection triggering, corrupted firmware, or HDMI-CEC commands from connected devices. Less commonly, a failing main board or backlight circuit can cause this symptom. Start with the hard reset and power connection checks before assuming hardware failure.

Can a bad HDMI cable make my LG OLED G2 turn on then off?

Yes, though indirectly. A damaged HDMI cable with a short can send unexpected voltage signals through the CEC line, causing the TV to interpret this as a power-off command. Additionally, cables with bent pins can cause protection circuits to activate. Try disconnecting all HDMI devices and cables as an early troubleshooting step.

Is the LG OLED G2 power board a known failure point?

Early production runs of the G2 series had some power board reliability concerns, particularly with specific capacitor lots. If your unit is under LG's 1-year standard warranty or an extended protection plan, contact LG directly for potential covered repair. Out-of-warranty units typically require power board replacement, which runs $200-400 depending on service provider.

Still Need Help With Your LG Device?

If these steps didn't resolve the turns on then off issue, our certified technicians can help.

Get Free Support Now →